Needle cylinder Injection tooling

LAUNCESTON has been operating since 2007 in SHENZHEN of China. With over 16 years of successful development, LAUNCESTON has grown into a premier manufacturer of high performance in the world, cost-effective custom molds and product molding, including Plastic mold, Die Casting mold, stamping mold, rubber mold and product molding for Automotive (interior and exterior),Appliances, Electronics, Packaging, Medical, and assembly etc. with the support of our R&D, Tooling, and Moulding, surface treatment centers, injection molding and part assembly department, LAUNCESTON provide a one-step solution. we are able to assist you with everything from concept to finished product, based on your needs and goals.as your manufacturing "arm" and we support you.

Description of Needle cylinder injection tooling

The advantage of our Needle cylinder preform injection mould including electric control system with simulating to improve yield rate; advanced technique to make each cavity self-lock, the eccentricity is within ±0.1mm; the weight/gram tolerance is ±0.2g, the mold has no margin and bur. no draw bench , breach and clamping preform mold. Core material of our Needle cylinder preform injection mould is stainless steel which imported from Sweden and Germany for sure to guarantee good tooling performance. International standard screw neck, imported nitrated steel with high hardness and long life. Advanced hot runner system with points to points control system, ensure uniform heating, which brings high quality performs; excellent cooling system brings high efficiency. automatically cut the tail of the preform to reduce the labor, the preform with smooth feeding point to enhance the appearance of the preform.

Details of Needle cylinder injection tooling

Product Name:	Needle cylinder injection tooling
Core Material:	S136 quenching	Brand:	OEM&ODM
Product Size:	Based on the processing size of our standard mold, we can also according to the customer's 3D drawings or samples.
Available material:	ABS/PC/PP/PA66/PBT
Consistency of Parts:	Less than +/-0.03 inch
Place of Origin:	CHINA&USA	MOQ：	Negotiable
Certificate:	GB/T 19001-2016 idt ISO9001：2015 GB/T24001-2016 idt ISO14001：2015 TS16949 and ISO45001 is being applied
Plastic sample:	Free	Packaging:	Plastic pallets
MOULD TIME	20-25 DAYS	Lead time:	10-25 DAYS

Our Advantages

To meet diverse requirements of our valued clients, we are engaged in offering an excellent range of Needle cylinder injection tooling.

1. High Wear-resistance

2. Good Anti-corrosion resistance

3. Good Self-Lubricin

4. Very high-impact resistance

5. Very good electrical insulation

6. High in adhesion resistance

7. Non-toxic and clean property.

Our promise

1. Provide on-site installation guide if it's necessary;

2. Responsible for the commissioning guide of equipment;

3. Responsible for the buyer's personnel mount guard before the operation and maintenance training;

4. One year free warranty (due to the buyer's improper operation caused by damage charge costs), and ensure the supply of spare parts for a long time, only charge part cost;

5. Provide technical advisory services for a long time;

FAQ

Q: How can we guarantee quality?

A: Special supervision team to control quality, all products will be inspected carefully before shipping. We pay much attention on the quality control and service to make long-term business relationship cooperation.

Q: How to open the exhaust in the plastic mould exhaust, should notice what?

A: The exhaust of plastic mould should be noted Don't be too stressed out Don't overheat the plastic Don't inject too quickly Don't give the piston back too early the weight of the plastic parts should be near the device's rating

Q: The effect of mould preheating and several methods of preheating?

A: Natural (coal) gas heating: a widely used method. Applicable to different mould shapes. The heater is made of pipes, and there are many small holes in it, and the gas is ejected and the size of the fire can adjust the air valve to achieve it. Clean without pollution, can be heated locally. The disadvantage is that it is controlled by people, and it is easy to burn the mold.

Q: How do you handle the die holder?

A: Clip wire, usually refers to Parting surface (Parting line or the Parting line), including the slider, inserts, lifter and so on between the two in the products with line. If the surface requirements are high, they are generally combined to discharge and polish.

Q: Which of the dies is movable?

A: The mould is designed according to the product that you produce, can move front model move also can behind, most mould design is hind model move.